Call Us at 1-844-208-1065 (Toll-Free)|info@scadacore.com
5 01, 2018

Mapping TLPs to Extended I/O in FBx (FB1200 / FB1100)

January 5th, 2018|Categories: Devices, Industrial Internet of Things, Oil And Gas Monitoring, Process Control, Remote Monitoring|Tags: , , , |0 Comments

A great feature of ROCLINK 800 was the ability to find the TLPs with the software. Field Tools, however, does not have this ability, so we need a map to find out what the Logical Point is for the TLPs. While ROCLINK 800 is still available to use with the FBx, you will have [...]

18 12, 2017

FBx Communications: Using Both ROCTalk and DNP Simultaneously

December 18th, 2017|Categories: Devices, Industrial Internet of Things, Oil And Gas Monitoring, Process Control, Remote Monitoring|Tags: , , , |0 Comments

As stated in our previous post, FBx Historical Configuration and Log Retrieval Using ROC Protocol for SCADA and IIoT Remote Monitoring, there are some significant changes to the way FBx are set up compared to the older Flobosses. One of the major changes between Flobosses and the new FBx flow computers is that the [...]

8 12, 2017

FBx Historical Configuration and Log Retrieval using ROC Protocol for SCADA and IIoT Remote Monitoring

December 8th, 2017|Categories: Devices, Industrial Internet of Things, Oil And Gas Monitoring, Process Control, Remote Monitoring|Tags: , , , |0 Comments

Significant changes has been made to Historical Configuration and Log Retrieval for the new FBx meters. SCADA hosts that are set up to poll data using the ROC Protocol with Opcode 130 (which obtains standard history from FloBoss devices), might require some changes when trying to use the ROC Protocol to interface with the [...]